CYCLOPS LONG RANGE OPTIMUS LED AUXILIARY LIGHT – ROUND

Description

Cyclops Long Range Optimus LED Auxiliary Lights – Round

Now with an even longer light beam throw
883 ft from a set of two 10-watt lights!
CE approved for 2016+

 

Please check out the install and programing videos at the bottom of this page.

 

All LED Lights are not created equal!

Best value and long range performance in one package. Don’t fall victim to overpriced high lumen “rated” low performing lights. Put the light where you need it, not in the tree tops. No other LED light matches the long range performance of the Cyclops Long Range Optimus Series.

All Cyclops Long Range lights come with unbreakable polycarbonate lenses and utilize proprietary IRIS Reflector Technology. The Long Range series provides the ultimate focus for long range lighting by producing 883 ft. of usable light from a single 3.5″ tall, 10-watt LED. Compared to a standard 55 watt low beam headlight reach of 88 ft., and a standard 65 watt high beam reach of 153 ft.

Filters are also available for the Long Range Round Lights. These drastically change the beam pattern and offer a tunable lighting solution. You can run one wide angle filter and one spot, or two wide beam pattern filters. Mix or match for a very tunable system. Amber filters are great for fog or adverse conditions as well making a huge difference with conspicuous lighting.

 

The Long Range lights are available in three beam pattern options:
10° lights provide the most distance.
20° degree lights offer very good distance and a bit more fill than the 10 degree
The combo kit is one 10° and one 20° light. Use this setup on a Motorcycle with the 20° on the right side (USA) for an extremely good lighting setup.
60° lights are also available on special request

 

Cyclops provides very high quality wire harnesses. Several versions are available to suite your needs. A general UTV, ATV, Motorcycle or Automotive Harness is included with the base kit. We also offer a motorcycle harness with a handle bar switch.

 

For more control, check out the following options:

 

The Cyclops Raider CANbus Interface for BMW covers most wiring needs for the R1200gs, R1200GSA, and the R1200RT and allows for full integration and customization. Dimming, flashing, decelerometer functions, as well as additional outputs for heated gear or other accessories. Find more info here.

 

The Skene Dimmer option (for all bikes) offers the user several different operating levels from 0 to 100% in 10% increments. With the Skene unit you can use your existing headlight switch to operate the high and low beam with no other switches required, or choose the single pole handle bar switch option if you would like to turn the lights completely off while riding. 3 Dimmer harnesses to choose from:

 

• Dimmable Harness NO switch – Allows you to use your existing headlight switch to operate the high and low beam with no other switches required,
• Dimmable Harness WITH handlebar switch – allows you to use your existing headlight switch to operate the high and low beam AND/OR choose to turn the auxiliary lights completely off while riding.
• Dimmable Harness with alert feature – provides a short flashing sequence when the high beam button is pressed twice in quick succession.
• NOTE: 2013/16 BMW R1200GS, 2018 and newer KTM1290R and S with the factory LED headlight require the Cyclops Raider CANbus interface in order to get dimming features. The Skene is not used on these bikes. KTM CANbus version to be available in early March.

 

Key Features:

– 883′ of Usable Light from 10-watt LED
– Proprietary IRIS Reflector Technology
– PWM Integrated Dimming Circuitry
– Integrated Electronic Thermal Management (ETM)
– Available as 2 Light Set with Wiring Harness

 

Distance:
A single Long Range Optimus throws 1 lux of light 883 feet.
For comparison, a motorcycle headlight low beam measures 1 lux at 88 feet, and high beam 1 lux at 153 feet.

 

Prime Drive runs the LED more efficiently while managing heat levels. This means more light from the LED and a longer lifespan. This is advanced LED technology in action. Electronic Thermal Management (ETM) monitors the heat output of the LEDs and makes use of integrated Pulse Width Modulation (PWM) circuitry to maintain safe operating temperatures and prolong the LED life span to its full 50,000 hour potential. PWM dimming circuitry works at managing heat levels by flashing the LED at a frequency faster than the human eye can detect, thus reducing the time that the LED is operating while still delivering 100% light output.

 

Compact and small design doesn’t mean weak either, as the Long Range Optimus doesn’t sacrifice light output to achieve an ultra-compact housing, in fact it’s the opposite. These lights outperform traditional halogen off-road lights in both distance and output while fitting within a housing that doesn’t look bulky and in the way.

 

Put away the huge, awkward looking lights, and get the driving lights that will amaze you every time you light them up!

 

Choose the light beam pattern you want, and if you want a dimming or non dimming harness. The price of the option will be added to the base price of $299.95