FLEXX ATV BEND CHART
Sweep – Dimension “A”
Shown in degrees / millimeters
Mid-Section Width – Dimension “B”
Enduro / Adventure bends will have 1″ narrower (B) measurement than MOTO Bends (7.25″ vs 8.25″)
Overall Width – Dimension “C”
Measured from handle end to handle end in inches
Height – “D”
Standard / High / Low measured in millimeters
Flexx Handlebar Notations and Definitions
- Cross Reference bar chart Please see the bottom of the page for a complete cross reference list of popular bar bends from other manufactures as well as OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend.
- Damper Crossbars Arched crossbars to accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. Sub/Fender Mount dampers do not require use of damper crossbars.
- Quad/Enduro Bends Our Quad/Enduro bends have a 1″ narrower mid section shown as measurement (B) with full length handles of our Moto bend, providing plenty of room to trim to your desired width.
- Handle Length All Moto and Enduro bends offer 9” of handle room over an inch more than a traditional 7/8″ or taper style bar. Adventure bends offer 10″ of handleroom.
- Accessory Applications Flexx Handlebar can be used with enduro computers, trip computers, GPS, steering dampers, roll charts, etc., etc. We offer a dash in our store section that will easily accommodate most GPS.
- Super Tenere/Adventure Bends The Super Tenere/Adventure bends are built on our narrow center section with longer handles, offering a full 10inches of handle room, easily accommodating all of your stock controls. We recommend Tenere customers use a threaded bar weight anchor to mount their stock bar weight/end caps. We offer threaded bar anchors in our store. Any sweep can be built as a Tenere/Adventure bend.
- Low Bar Low Bar-The Low bends are incredibly low at 63mm of height. Low bends require 19mm of clearance between the bottom of the bar and the fork caps. Low bends are designed to used with a under bar damper, bringing the bar height down to 10mm lower than stock height in most applications.
- All Flexx Handlebars require a 1 1/8″ bar clamps.
- All bars are shipped with silver bar pads – many other colors are available.
Handlebar Bend Options
| 12 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 12° Quad Racer Low | 12° / 54mm | 31 / 787 | 92 | FL-1001-12-31 |
| 12° Quad Racer | 12° / 54mm | 31 / 787 | 116 | FL-1003-12-31 |
| 12° Moto | 12° / 54mm | 32 / 812 | 92 | FL-1001-12-32 |
| 12° Moto High | 12° / 54mm | 32 / 812 | 116 | FL-1003-12-32 |
| 12° Mini High | 12° / 54mm | 29 / 736 | 116 | FL-1002-12-29 |
| 12° Mini Low | 12° / 54mm | 29 / 736 | 92 | FL-1001-12-29 |
| 14 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 14° Quad Racer Low | 14° / 57mm | 31 / 787 | 92 | FL-1001-14-31 |
| 14° Quad Racer | 14° / 57mm | 31 / 787 | 116 | FL-1003-14-31 |
| 14° Moto | 14° / 57mm | 32 / 812 | 92 | FL-1001-14-32 |
| 14° Moto High | 14° / 57mm | 32 / 812 | 116 | FL-1003-14-32 |
| 14° Mini High | 14° / 57mm | 29 / 736 | 116 | FL-1003-14-29 |
| 14° Mini Low | 14° / 57mm | 29 / 736 | 92 | FL-1001-14-29 |
| 15 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 15° Quad Racer Low | 15° / 62mm | 31 / 787 | 92 | FL-1001-15-31 |
| 15° Quad Racer | 15° / 62mm | 31 / 787 | 116 | FL-1003-15-31 |
| 15° Moto | 15° / 62mm | 32 / 812 | 92 | FL-1001-15-32 |
| 15° Moto High | 15° / 62mm | 32 / 812 | 116 | FL-1003-15-32 |
| 15° Mini High | 15° / 62mm | 29 / 736 | 116 | FL-1002-15-29 |
| 15° Mini Low | 15° / 62mm | 29 / 736 | 92 | FL-1001-15-29 |
| 19 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 19° Quad Racer Low | 19° / 80mm | 31 / 787 | 92 | FL-1001-19-31 |
| 19° Quad Racer | 19° / 80mm | 31 / 787 | 116 | FL-1003-19-31 |
| 19° Moto | 19° / 80mm | 32 / 812 | 92 | FL-1001-19-32 |
| 19° Adventure | 19° / 80mm | 32.5 / 825.5 | 116 | FL-1004-19-32.5 |
Popular Bends from Other Brands (Cross Reference)
| Model | (A) Sweep | (C) Width | (D) Height | Comparable Flexx Handlebar |
|---|---|---|---|---|
| CR High | 62 | 795 | 95 | 15° Moto |
| RC High | 54 | 802 | 119 | 12° Moto High |
| 971 | 54 | 802 | 99 | 12° Moto |
| RC | 54 | 802 | 99 | 12° Moto |
| Windham/MC/Henry/Reed | 57 | 803 | 92 | 14° Moto |
| YFZ 450 2007-2014 | 86 | 784 | 105 | 19° Quad |
| YZF 2007-2012 | 62 | 795 | 90 | 15° Moto |
| Jimmy Button | 67 | 807 | 110 | 15° Adventure |
| Stewart | 55 | 805 | 93 | 12° Moto |
| Stock TRX | 90 | 790 | 142 | 19° Quad |
| KFX 450 | 72 | 769 | 96 | 15° Quad Low |
OEM Cross Reference
| Manufacturer / Model | Comparable Flexx Handlebar | Notes |
|---|---|---|
| Apex Pro MXR 50 | 15° Mini Hi | 2010 and older require an oversize mount |
| Apex Pro MXR 70 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 85 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 90 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 100 | 15° Quad | 2010 and older require an oversize mount |
| Apex 250F | 14° Quad | |
| Apex 450F | 14° Quad | |
| Apex Pro Shark 70 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro Shark 90 | 15° Quad | 2010 and older require an oversize mount |
| Can-am Outlander 400/650/800 | 15° Quad | 2″ Rox Riser |
| Can-am Renegade | 15° Quad | |
| Can-am DS 450 | 15° Moto | |
| Can-am DS 250 | 15° Quad | 2″ Rox Riser |
| Can-am DS 70/90 X | 15° Mini Low | 2″ Rox Riser |
| Can-am DS 70/90 X | 15° Mini Low | 2″ Rox Riser |
| Cobra ECX 50 | 15° Mini Low | Requires oversize mounts |
| Cobra ECX 70 | 15° Quad Race | Requires oversize mounts |
| DRR DRX2 50R | 15° Mini Hi | Requires oversize mounts |
| DRR DRX2 50 LTD | 15° Mini Hi | Requires oversize mounts |
| DRR DRX2 70 | 15° Quad | Requires oversize mounts |
| DRR DRX2 90 | 15° Quad | Requires oversize mounts |
| DRR DRX2 90 LTD | 15° Quad | Requires oversize mounts |
| DRR DRX4 | 15° Quad | Requires oversize mounts |
| DRR DRX 300 | 15° Quad Low | 2″ Rox Riser |
| Honda TRX 450 | 14°/15° Quad | Requires oversize mounts |
| Honda TRX 700 | 15° Quad | 2″ Rox Riser |
| Honda TRX 400 | 15° Quad | 2″ Rox Riser |
| Honda TRX 300 | 15° Quad Low | 2″ Rox Riser |
| Honda TRX 250 | 15° Quad | 2″ Rox Riser |
| Honda TRX 90 | 15° Mini Low | 2″ Rox Riser |
| KTM SX/XC 450/505/525 | 15° Moto | Stock Mounts |
| Kawasaki KFX 450 | 15° Quad | Stock mounts |
| Kawasaki KFX 700 | 15° Quad | 2″ Rox Riser |
| Kawasaki KFX 90 | 15° Mini | 2″ Rox Riser |
| Kawasaki KFX 50 | 15° Mini Low | 2″ Rox Riser |
| Kawasaki Brute Force 650/750 | 19° Quad | 2″ Rox Riser |
| Pister Pro FXR 90R E-START MINI | 12° Quad | Requires 1 1/8 bar mounts |
| Pister Pro FXR 125R MINI ATV | 12° Quad | Requires 1 1/8 bar mounts |
| Pister Pro FXR 150R MINI ATV | 12° Quad | Requires 1 1/8 bar mounts |
| Polaris Outlaw 450/525 | 15° Quad Low | 2″ Rox Riser |
| Polaris Outlaw 90 | 15° Quad Low | 2″ Rox Riser |
| Polaris Outlaw 50 | 15° Quad Low | 2″ Rox Riser |
| Polaris Sportsman 550/850 | 19° Quad | 2″ Rox Riser |
| Polaris Sportsman 500/800 | 19° Quad | 2″ Rox Riser |
| Polaris Sportsman 300/400 | 19° Quad | 2″ Rox Riser |
| Suzuki LTR 450 | 15° Quad Low | 2″ Rox Riser |
| Suzuki Z400 | 15° Quad Low | 2″ Rox Riser |
| Suzuki Z 250 | 15° Quad | 2″ Rox Riser |
| Suzuki Z 90 | 15° Mini Low | 2″ Rox Riser |
| Yamaha YFZ 450 | 15° Quad | Stock Mounts; YZF prior to 2006 require 1 1/8 bar mounts |
| Yamaha Raptor 700 | 15° Quad | 2″ Rox Riser |
| Yamaha Raptor 250/350 | 15° Quad | 2″ Rox Riser |
| Yamaha Raptor 90 | 15° Mini | 2″ Rox Riser |
| Yamaha Wolverine 450 | 19° Quad | 3″ Rox Riser |
| Yamaha Grizzly 550/700 | 19° Quad | 3″ Rox Riser |
| Yamaha Grizzly 350/450 | 19° Quad | 3″ Rox Riser |
Sweep – Dimension “A”
Shown in degrees / millimeters
Mid-Section Width – Dimension “B”
Enduro / Adventure bends will have 1″ narrower (B) measurement than MOTO Bends (7.25″ vs 8.25″)
Overall Width – Dimension “C”
Measured from handle end to handle end in inches
Height – “D”
Standard / High / Low measured in millimeters
Flexx Handlebar Notations and Definitions
- Cross Reference bar chart Please see the bottom of the page for a complete cross reference list of popular bar bends from other manufactures as well as OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend.
- Damper Crossbars Arched crossbars to accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. Sub/Fender Mount dampers do not require use of damper crossbars.
- Quad/Enduro Bends Our Quad/Enduro bends have a 1″ narrower mid section shown as measurement (B) with full length handles of our Moto bend, providing plenty of room to trim to your desired width.
- Handle Length All Moto and Enduro bends offer 9” of handle room over an inch more than a traditional 7/8″ or taper style bar. Adventure bends offer 10″ of handleroom.
- Accessory Applications Flexx Handlebar can be used with enduro computers, trip computers, GPS, steering dampers, roll charts, etc., etc. We offer a dash in our store section that will easily accommodate most GPS.
- Super Tenere/Adventure Bends The Super Tenere/Adventure bends are built on our narrow center section with longer handles, offering a full 10inches of handle room, easily accommodating all of your stock controls. We recommend Tenere customers use a threaded bar weight anchor to mount their stock bar weight/end caps. We offer threaded bar anchors in our store. Any sweep can be built as a Tenere/Adventure bend.
- Low Bar Low Bar-The Low bends are incredibly low at 63mm of height. Low bends require 19mm of clearance between the bottom of the bar and the fork caps. Low bends are designed to used with a under bar damper, bringing the bar height down to 10mm lower than stock height in most applications.
- All Flexx Handlebars require a 1 1/8″ bar clamps.
- All bars are shipped with silver bar pads – many other colors are available.
Handlebar Bend Options
| 12 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 12° Quad Racer Low | 12° / 54mm | 31 / 787 | 92 | FL-1001-12-31 |
| 12° Quad Racer | 12° / 54mm | 31 / 787 | 116 | FL-1003-12-31 |
| 12° Moto | 12° / 54mm | 32 / 812 | 92 | FL-1001-12-32 |
| 12° Moto High | 12° / 54mm | 32 / 812 | 116 | FL-1003-12-32 |
| 12° Mini High | 12° / 54mm | 29 / 736 | 116 | FL-1002-12-29 |
| 12° Mini Low | 12° / 54mm | 29 / 736 | 92 | FL-1001-12-29 |
| 14 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 14° Quad Racer Low | 14° / 57mm | 31 / 787 | 92 | FL-1001-14-31 |
| 14° Quad Racer | 14° / 57mm | 31 / 787 | 116 | FL-1003-14-31 |
| 14° Moto | 14° / 57mm | 32 / 812 | 92 | FL-1001-14-32 |
| 14° Moto High | 14° / 57mm | 32 / 812 | 116 | FL-1003-14-32 |
| 14° Mini High | 14° / 57mm | 29 / 736 | 116 | FL-1003-14-29 |
| 14° Mini Low | 14° / 57mm | 29 / 736 | 92 | FL-1001-14-29 |
| 15 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 15° Quad Racer Low | 15° / 62mm | 31 / 787 | 92 | FL-1001-15-31 |
| 15° Quad Racer | 15° / 62mm | 31 / 787 | 116 | FL-1003-15-31 |
| 15° Moto | 15° / 62mm | 32 / 812 | 92 | FL-1001-15-32 |
| 15° Moto High | 15° / 62mm | 32 / 812 | 116 | FL-1003-15-32 |
| 15° Mini High | 15° / 62mm | 29 / 736 | 116 | FL-1002-15-29 |
| 15° Mini Low | 15° / 62mm | 29 / 736 | 92 | FL-1001-15-29 |
| 19 Degree Bends | (A) Sweep | (C) Width | (D) Height | Part Number |
|---|---|---|---|---|
| 19° Quad Racer Low | 19° / 80mm | 31 / 787 | 92 | FL-1003-19-31 |
| 19° Quad Racer | 19° / 80mm | 31 / 787 | 116 | FL-1001-19-31 |
| 19° Moto | 19° / 80mm | 32 / 812 | 92 | FL-1001-19-32 |
| 19° Adventure | 19° / 80mm | 32.5 / 825.5 | 116 | FL-1004-19-32.5 |
Popular Bends from Other Brands (Cross Reference)
| Model | (A) Sweep | (C) Width | (D) Height | Comparable Flexx Handlebar |
|---|---|---|---|---|
| CR High | 62 | 795 | 95 | 15° Moto |
| RC High | 54 | 802 | 119 | 12° Moto High |
| 971 | 54 | 802 | 99 | 12° Moto |
| RC | 54 | 802 | 99 | 12° Moto |
| Windham/MC/Henry/Reed | 57 | 803 | 92 | 14° Moto |
| YFZ 450 2007-2014 | 86 | 784 | 105 | 19° Quad |
| YZF 2007-2012 | 62 | 795 | 90 | 15° Moto |
| Jimmy Button | 67 | 807 | 110 | 15° Adventure |
| Stewart | 55 | 805 | 93 | 12° Moto |
| Stock TRX | 90 | 790 | 142 | 19° Quad |
| KFX 450 | 72 | 769 | 96 | 15° Quad Low |
OEM Cross Reference
| Manufacturer / Model | Comparable Flexx Handlebar | Notes |
|---|---|---|
| Apex Pro MXR 50 | 15° Mini Hi | 2010 and older require an oversize mount |
| Apex Pro MXR 70 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 85 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 90 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro MXR 100 | 15° Quad | 2010 and older require an oversize mount |
| Apex 250F | 14° Quad | |
| Apex 450F | 14° Quad | |
| Apex Pro Shark 70 | 15° Quad | 2010 and older require an oversize mount |
| Apex Pro Shark 90 | 15° Quad | 2010 and older require an oversize mount |
| Can-am Outlander 400/650/800 | 15° Quad | 2″ Rox Riser |
| Can-am Renegade | 15° Quad | |
| Can-am DS 450 | 15° Moto | |
| Can-am DS 250 | 15° Quad | 2″ Rox Riser |
| Can-am DS 70/90 X | 15° Mini Low | 2″ Rox Riser |
| Can-am DS 70/90 X | 15° Mini Low | 2″ Rox Riser |
| Cobra ECX 50 | 15° Mini Low | Requires oversize mounts |
| Cobra ECX 70 | 15° Quad Race | Requires oversize mounts |
| DRR DRX2 50R | 15° Mini Hi | Requires oversize mounts |
| DRR DRX2 50 LTD | 15° Mini Hi | Requires oversize mounts |
| DRR DRX2 70 | 15° Quad | Requires oversize mounts |
| DRR DRX2 90 | 15° Quad | Requires oversize mounts |
| DRR DRX2 90 LTD | 15° Quad | Requires oversize mounts |
| DRR DRX4 | 15° Quad | Requires oversize mounts |
| DRR DRX 300 | 15° Quad Low | 2″ Rox Riser |
| Honda TRX 450 | 14°/15° Quad | Requires oversize mounts |
| Honda TRX 700 | 15° Quad | 2″ Rox Riser |
| Honda TRX 400 | 15° Quad | 2″ Rox Riser |
| Honda TRX 300 | 15° Quad Low | 2″ Rox Riser |
| Honda TRX 250 | 15° Quad | 2″ Rox Riser |
| Honda TRX 90 | 15° Mini Low | 2″ Rox Riser |
| KTM SX/XC 450/505/525 | 15° Moto | Stock Mounts |
| Kawasaki KFX 450 | 15° Quad | Stock mounts |
| Kawasaki KFX 700 | 15° Quad | 2″ Rox Riser |
| Kawasaki KFX 90 | 15° Mini | 2″ Rox Riser |
| Kawasaki KFX 50 | 15° Mini Low | 2″ Rox Riser |
| Kawasaki Brute Force 650/750 | 19° Quad | 2″ Rox Riser |
| Pister Pro FXR 90R E-START MINI | 12° Quad | Requires 1 1/8 bar mounts |
| Pister Pro FXR 125R MINI ATV | 12° Quad | Requires 1 1/8 bar mounts |
| Pister Pro FXR 150R MINI ATV | 12° Quad | Requires 1 1/8 bar mounts |
| Polaris Outlaw 450/525 | 15° Quad Low | 2″ Rox Riser |
| Polaris Outlaw 90 | 15° Quad Low | 2″ Rox Riser |
| Polaris Outlaw 50 | 15° Quad Low | 2″ Rox Riser |
| Polaris Sportsman 550/850 | 19° Quad | 2″ Rox Riser |
| Polaris Sportsman 500/800 | 19° Quad | 2″ Rox Riser |
| Polaris Sportsman 300/400 | 19° Quad | 2″ Rox Riser |
| Suzuki LTR 450 | 15° Quad Low | 2″ Rox Riser |
| Suzuki Z400 | 15° Quad Low | 2″ Rox Riser |
| Suzuki Z 250 | 15° Quad | 2″ Rox Riser |
| Suzuki Z 90 | 15° Mini Low | 2″ Rox Riser |
| Yamaha YFZ 450 | 15° Quad | Stock Mounts; YZF prior to 2006 require 1 1/8 bar mounts |
| Yamaha Raptor 700 | 15° Quad | 2″ Rox Riser |
| Yamaha Raptor 250/350 | 15° Quad | 2″ Rox Riser |
| Yamaha Raptor 90 | 15° Mini | 2″ Rox Riser |
| Yamaha Wolverine 450 | 19° Quad | 3″ Rox Riser |
| Yamaha Grizzly 550/700 | 19° Quad | 3″ Rox Riser |
| Yamaha Grizzly 350/450 | 19° Quad | 3″ Rox Riser |